Fiber Optic - Optic Fibers

STA-FLEX FLEXCOAT "SFC"
LINEAR OPTICAL FIBER

Project:
Type: Solid Optic Fiber Cable
Catalog Number: SFC
System Component: Optical Fiber

DESCRIPTION:

LUMENYTE STA-FLEX FLEXCOAT “SFC” linear optical fiber consists of a light transmitting solid large core, Teflon® cladding and a durable, flexible, fire-retardant clear outer jacket. This unique construction enables the optical fiber to expand its reflection area through the jacket creating a neon-like appearance. It is ideal for exterior and interior applications such as building perimeters, walkways, accent lighting and water features. STA-FLEX® FLEXCOAT installs easily and contains UV inhibitors, algaecides and fungicides. The bondable jacket allows for easy splicing. For submersed applications an additional "-WR" jacketing is required.

STA-FLEX® Large Core
Indoor/Outdoor Applications
UV Inhibitors
Algaecides and Fungicides Resistant
Clear, Flexible, Bondable Jacket
Wide 80° Acceptance Angle
UL94VO Fire Rated
Clear, Luminous Appearance
Long Life Flexibility

SPECIFICATIONS:

Transmission Loss (attenuation)

Less than 1.5% per foot (SFC501)

Bend Radius (minimum)

6 x Fiber Diameter

Recommended

12 x Fiber Diameter or larger

Temperature Stability

Up to 90° C (194° F)

Spectral Transmission Range

350-800 nm

Acceptance Angle

80°

Refractive Index Core:

1.48 or greater

Cladding:

1.34 or less

Numerical Aperture

0.63

SFC Fiber Optic Cable

Maximum Manufactured Length

• 100 feet (30.5m) continuous

Maximum Distance for Effective Brightness

The effective light output of optical fiber is based upon several variables such as:

• Intensity of light source	• Fiber length and attenuation	• Color of light
• Quantity of fibers in illuminator	• Background color contrast	• Number and radius of bends
• Diameter of fiber	• Viewing angle	• Ambient light level

Splicing and Cutting

• Splicing can be achieved in the field using Lumenyte Splice Kits and carefully following the instructions. Factory splicing is available. Lumenyte's Optic Cutter is advised for straight, clean, 90° fiber cuts.

Environment

• Avoid allowing liquids between the core and cladding. Use end seals bonded with SC2081 glue.
• Avoid dirt and abrasions on the core and jacket.
• Install fibers in 10° C (50° F) or higher temperature
.

Installation into the Non-Harness Illuminator

• Fiber end should be near, but not touching the illuminator glass to achieve maximum brightness.

Fiber Optic - Optic Fibers

STA-FLEX FLEXCOAT "SFC" LINEAR OPTICAL FIBER

STA-FLEX FLEXCOAT "SFC"
LINEAR OPTICAL FIBER