Fiber Optic lighting by Lumenyte

FIBER OPTIC ILLUMINATORS
Maestro Series 75W Quartz Halogen
Project: Type: Illuminator Wet / Dry Catalog Number: M System Component: Illuminator

DRY ENCLOSURE	WET ENCLOSURE

SPECIFICATIONS:

Enclosure
Dimensions

Finish / Material
Shipping Weight
NEMA Rating
IP Rating
Number of Ports

Dry Enclosure
W: 6.52” (16.6 cm)
L: 6.79” (17.3 cm)
H: 5.82” (14.8 cm)
Powder-Coated CRS
8.75 Lbs (Nominal)
1
20
1 or 2

Wet Enclosure
W: 8.41” (21.4 cm)
L: 6.79” (17.3 cm)
H: 5.82” (14.8 cm)
Powder-Coated CRS
8.75 Lbs (Nominal)
3R
24
1 or 2

Power Requirements
Voltages

Starting Amps
Running Amps
Fuse
Listings

Magnetic: 120V/60Hz, 240V/60Hz & 50Hz
Electronic: 120V/60Hz
1.75 Amps @ 120V - .86 Amps @ 240V
1.5 Amps @ 120V - .42 Amps @ 240V
None
ETL (Based on UL Standard 1598); CSA; CE Marked

Lamp
Type
Wattage
Color Temperature
Average Rated Lamp Life
Replacement PN

MR16 Quartz Halogen
75 Watt
3100° K
4,000 Hours
L9N-001

Ventilation
Standard Fan
Ambient Operating Temp.
Mounting Clearance

81 CFM Sealed Bearing Axial
-20°F (-29°C) to 110°F (43°C)
Minimum 12" between adjacent illuminators or other obstruction. If installed in an
enclosed area with positive ventilation, a minimum of 3 cubic feet of surrounding
airspace is required for each illuminator.

Harness
PS-HARN (Stranded)
AR-HARN (Large Core)

Up to 850 Fibers Maximum (Based on .75mm Fibers)
Refer to Pages HA-2A and B for configuration

Warranty

Limited 1 year warranty on parts and labor
(excluding lamps)

PART NUMBER CONFIGURATION

Notes

1) This is an instant-on illuminator with no re-strike time.
2) Magnetic Transformer options are available in Single Port configurations ONLY.
3) Re-lamping: Lamp is extremely hot to the touch. Allow one hour to cool before removal. Handle by reflector edges only. Damage to the lamp and/or reflector will occur from contamination by the natural oils on your hands.
4) Refer to Figures 1 & 2 above for proper mounting orientation on a wall or other vertical surface. The Dry Enclosure configuration may also be mounted on a shelf or other horizontal surface. The Wet Enclosure configuration must not be mounted on a shelf or other horizontal surface. In all configurations, be certain to provide adequate ventilation and do not allow the vents to become obstructed.
5) Dimmers and dimming circuits shall be supplied by others.
6) In dual port configurations with the 1LC or 2LC line cord options, both lamps will dim simultaneously.
7) In a dual port configuration, a single twinkle wheel will cover both ports. (See 1st Color Options TW1, TW2 & TWH in Part Number Configuration).
8) All specifications are subject to change without notice.

FIBER OPTIC ILLUMINATORS

Maestro Series 75W Quartz Halogen