Fiber Optic lighting by Lumenyte

FIBER OPTIC ILLUMINATORS
Encore AR250QH 250W Quartz Halogen (Ushio)
Project: Type: Illuminator Wet / Dry Catalog Number: AR250QH System Component: Illuminator

DRY ENCLOSURE	WET ENCLOSURE

SPECIFICATIONS:

Enclosure
Dimensions

Finish / Material
Shipping Weight
NEMA Rating
IP Rating
Number of Ports

Dry Enclosure
W: 11.12" (28.25cm)
L: 10.75" (27.3cm)
H: 6.60" (16.76cm)
Anodized Aluminum
9.0 Lbs (4.1Kg) Nominal
1
20
1

Wet Enclosure
W: 12.00" (30.40cm)
L: 11.06" (28.04cm)
H: 6.63" (16.84cm)
Powder-Coated CRS
18.1 Lbs (8.2Kg) Nominal
3R
44
1

Power Requirements
Voltages

Starting Amps

Running Amps

Fuse
Listings

Regulated, 250 Watt, Fused Cord Connector (Magnetic)
Available in a wide range of voltages in 50 or 60 Hz. See Part Number Configuration on back for options. (Standard configuration: 120V/60Hz)
2.7 Amps @ 110V (Nominal) with standard magnetic transformer
2.0 Amps @ 110V (Nominal) with standard magnetic transformer
1.25in x .25in, 5.0 Amp, Fast Acting
ETL (Based on UL Standard 1598); CSA; CE Marked

Lamp
Type

Wattage

Color Temperature
Average Lamp Life
Replacement PN

Ushio MR16 24V ELC, Quartz Halogen Dichroic Glass Module
165 Watt (De-rated from 250 Watt)
900 at 1foot (30.5cm) Test Fiber; 1,066 at Port
3150° K
1,500 Hours
LCN-00

Noise Level
Standard Fan
Quiet Fan

40.2 dB(A) / 47.5 dB(L)
37.4 dB(A) / 47.5 dB(L)

Harness
PS-HARN (Stranded)
AR-HARN (Large Core)

Up to 850 Fibers Maximum (Based on .75mm Fibers)
Refer to Pages HA-2A and B for configuration

Warranty

Limited 1 year warranty on parts and labor
(excluding lamps)

PART NUMBER CONFIGURATION

Notes

1) Encore Illuminators are air-cooled. Positive ventilation must be provided for proper operation. If installed in an enclosed area, a minimum of 4 cubic feet of surrounding airspace is required for each illuminator. A minimum of 12" mounting clearance is required between adjacent illuminators or other obstructions.
DO NOT allow the air vents to become obstructed.
Ventilation can be improved with the addition of the DUCT-AR kit, sold separately.
2) Relamping: Lamp is extremely hot to the touch. Allow sufficient time to cool before removal. Handle by reflector edges only.
Damage to the lamp and/or reflector will occur from contamination by the natural oils on your hands. Clean cotton gloves are recommended.
3) Refer to Figures 1 & 2 above for proper mounting orientation on a wall or other vertical surface. The Dry Enclosure configuration may also be mounted on a shelf or other horizontal surface. The Wet Enclosure configuration is designed for vertical surface mounting only with the aperture and air vents pointing downward.
DO NOT mount the Wet Enclosure unit on a shelf or other horizontal surface.
4) Fiber(s) should exit illuminator straight for at least 12" before large bends. Splices to harness fiber must occur on STRAIGHT portions of fiber, not on bends.
5) Refer to Control section of Part Number Configuration above for dimming options.
6) Do not mount with fiber harness aperture upward.
7) All specifications are subject to change without notice.

FIBER OPTIC ILLUMINATORS

Encore AR250QH 250W Quartz Halogen (Ushio)