OPTICAL FIBER
Quality Optical Fiber !
Small and Large core with a variety of jacketing.
HOMELAND SECURITY
FORCE PROTECTION Products !
Tactical Safety & security lighting products.
Optical Fiber Illuminator 650029 Product Information
FIBER OPTIC ILLUMINATORS |
|
Encore AR150CM 150W Metal Halide Illuminators |
|
| Project: Type: Illuminator Wet / Dry Catalog Number: AR150CM System Component: Illuminator |
|
| DRY LOCATIONS HOUSING | WET LOCATIONS SETTING |
|
|
|
|
| SPECIFICATIONS: | ||||||||||||
| Enclosure Dimensions Finish / Material Shipping Weight NEMA Rating IP Rating Number of Ports Temperature |
Dry
Enclosure W: 11.12" (28.25cm) L: 10.75" (27.3cm) H: 6.60" (16.76cm) Anodized Aluminum 9.0 Lbs (4.1Kg) Nominal 1 20 1 -20°F (-29°C) to 110°F (43°C) |
Wet
Enclosure W: 12.00" (30.40cm) L: 11.06" (28.04cm) H: 6.63" (16.84cm) Powder-Coated CRS 18.1 Lbs (8.2Kg) Nominal 3R 44 1 -20°F (-29°C) to 110°F (43°C) |
||||||||||
| Power Requirements Voltages Starting Amps Running Amps Fuse Listings |
Magnetic: Available in a wide range of voltages in 50 or 60 Hz. See Part Number Configuration on back for options. (Standard configuration: 120V/60Hz) Electronic: 120V 50/60Hz 1.98 Amps @ 110V (Nominal) with standard magnetic transformer 1.53 Amps @ 110V (Nominal) with standard magnetic transformer 1.41 Amps @ 110V (Nominal) with Electronic Ballast 1.25in x .25in, 5.0 Amp, Fast Acting ETL (Based on UL Standard 1598); CSA; CE Marked |
|||||||||||
| Lamp Type Reflector Wattage Lumen Output Color Temperature Average Lamp Life Replacement PN |
CDM-SA/R 150W/942 UV-Block Metal Halide with Reflector, Short Arc Dichroic Glass Module 150 Watt 2,083 at 1' (30.5cm) Test Fiber; 3,073 at Port (Magnetic) 2,450 at 1' (30.5cm) Test Fiber; 3,688 at Port (Electronic) 3000° K and 4000° K, 96 CRI lamp options available 4,000 Hours (Average -Manufacturers Specifications) 3K Lamp - L9N-015 / 4K Lamp - L9N-005 |
|||||||||||
| Noise Level Standard Quite Fan |
40.2 dB(A) / 47.5 dB(L) 37.4 dB(A) / 47.5 dB(L) |
|||||||||||
| Warranty | Limited
1 year warranty on parts and labor (excluding lamps) |
|||||||||||
|
||||||||||||
| Notes | ||||||||||||
| 1) Encore Illuminators are air-cooled. Positive
ventilation must be provided for proper operation.
If installed in an enclosed area, a minimum of 4
cubic feet of surrounding airspace is required for
each illuminator. A minimum of 12" mounting
clearance is required between adjacent illuminators
or other obstructions. DO NOT allow the air vents to become obstructed. Ventilation can be improved with the addition of the DUCT-AR kit, sold separately. 2) Relamping: Lamp is extremely hot to the touch. Allow sufficient time to cool before removal. Handle by reflector edges only. Damage to the lamp and/or reflector will occur from contamination by the natural oils on your hands. Clean cotton gloves are recommended. 3) Refer to Figures 1 & 2 above for proper mounting orientation on a wall or other vertical surface. The Dry Enclosure configuration may also be mounted on a shelf or other horizontal surface. The Wet Enclosure configuration is designed for vertical surface mounting only with the aperture and air vents pointing downward. DO NOT mount the Wet Enclosure unit on a shelf or other horizontal surface. 4) Fiber(s) should exit illuminator straight for at least 12" before large bends. Splices to harness fiber must occur on STRAIGHT portions of fiber, not on bends. 5) Refer to Control section of Part Number Configuration above for dimming options. 6) Do not mount with fiber harness aperture upward. 7) All specifications are subject to change without notice. |
||||||||||||
